UMC 188G-GB-5B-TCU-UK, User Manual, Page: 11 / 33

Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk
11 11
Detaching the stand and wall mounting
fi g 1
fi g 2
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV’s screen is ‘face on’.
See fi g 1 and 2
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes. If in doubt please
contact a qualifi ed tradesman.
Wall mounting the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the
rear of the TV. These holes are indicated in the picture below.
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
TV
TV
Viewing angle
INCORRECT
CORRECT
Viewing angle
DETACHING THE STAND
32-188G-GB-5B-TCU-UK
1) Remove the 5 screws highlighted then remove
the neck and base from the TV set.
39-210G-GB-5B-FTCU-UK
1) Remove the 6 screws highlighted then remove
the neck and base from the TV set.
Detaching the Stand
For 32-188G-GB-5B-TCU-UK only
Detaching the Stand
For 39-210G-GB-5B-FTCU-UK only
4 x B
M (4x16) 2 x A
M (4x20)
A
A
B
B
B
B
4 x B
M (4x16) 2 x A
M (4x20)
5 x M(4x12)
2
Manual - UMC -32-188G GB 5B TCU UK, 39-210G GB 5B FTCU UK.indd Sec1:11 Manual - UMC -32-188G GB 5B TCU UK, 39-210G GB 5B FTCU UK.indd Sec1:11 21/09/2012 16:08:16 21/09/2012 16:08:16