UMC 15/4 User Manual Download Page 3

WARNINGS

Thank you for purchasing this television. For your safety, please take time to read 
these instructions carefully in order to familiarise yourself with the operation 
of the appliance and the important safety information.  We strongly recommend 
that this product is installed by a competent person. If in doubt, refer to the retailer 
or the manufacturer helpline.

Caution

This television contains no user serviceable parts. Please refer to the manufacturer 
or authorised repair agent in the event of malfunction. Do not remove the back cover 
from the television. 

Warning

To reduce the risk of fire, electric shock or damage to the television, do not expose 
it to dust, rain or moisture, or place any objects filled with liquids on or near the television.

Do not place the television in a confined space, ensure that nothing can obstruct 
the ventilation openings at the rear of the television. 

Do not place naked flames on or near the television.

Dispose of  this television and any components including batteries in an environmentally 
friendly manner. If in doubt, please contact your local authority for details of recycling.

Your LCD TV should be cleaned using a dry or slightly damp cloth. You should not use 
an alcohol based cleaner

Safety

For your safety, this appliance is fitted with a fused moulded 3 pin mains plug. Should 
the fuse need to be replaced, ensure that any replacement is of the same amperage 
and approved with the BSI mark. (    )

Never try and replace the mains plug unless you have adequate qualifications and are 
legally authorised to do so. In the event that a replacement Mains cable is required, 
contact the manufacturer for a suitable replacement. 

Never use the television if it is damaged in any way. 

Always place the television on a flat level surface avoiding anywhere which may 
be subject to strong vibration. Ensure the television is not placed on top of the power 
cable as the weight of the television may damage the cable and cause a safety hazard. 

Never place mobile phones, speakers or any other device which may cause magnetic 
or radio interference with the television. If interference is apparent, move the device 
causing the interference away from the television.

Packaging

Please save the packaging for the television as you will need this in the event 
of warranty/service repair or support. We are unable to carry out warranty/service 
if you are unable to package it correctly. The safest way to package your item in the 
event of warranty/service repair is in its original box/packaging

Summary of Contents for 15/4





























Reviews: