Umbrella Mesh Network Umbra Legacy, User Manual, Page: 9 / 13

9
Umbra Legacy
User guide -
Brought to you by Umbrella Mesh Network
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602 - 5276 Ben@umbrellameshnetwork.com
Enroll Wireless Detector— 32 zone slots available
•
With the Umbra Legacy panel in the disarmed state, press and hold the “ Enroll ” button for 3 seconds.
The panel will emit the “ correct operation ” short “ Di ” and then press the “ Enroll ” button again to get to
the Zone Slots. The display will flash “01” if the slot is available. If the slot is not available, the display will
show “01” steady.
•
To enroll a wireless detector into this slot if it is available, trigger the device.
•
To enroll a wireless detector into a different slot, press the “ WiFi “ button to go to the next slot and the
display will show the next device slot. Press “ Enroll ” button 3 times to exit at any time.
1. Press “ enroll ” for 3s,
then press again for Zone menu
2. Trigger Device
4. Press “ WiFi ” to enroll next
3. Enroll Succeeded
Delete Wireless Detector
•
With desired Zone slot selected on display—press and hold “ WiFi ” button for 3 seconds to delete