6
Reviewing safety
•
Every person with in range must wear eye, face and ear protection
designed specifically to stop paintballs and meeting Specification F1776
(ASTM).
•
Always measure your marker’s velocity before playing paintball and
never shoot at velocities in excess of 91.44m/s (300ft/s).
•
Always store your weapon unloaded, degassed and with the safety on
"safe". Keep it away from unauthorized persons (unskilled persons,
children, persons less than 18 years old) and keep it separate from the
ammunition.
•
Never point the airgun marker at any person or at anything you do not
intend to shoot.
•
Always treat the airgun as though it is loaded and with the same
respect you would a firearm.
•
Always aim in a SAFE DIRECTION . Always keep the muzzle of the
airgun marker pointed in a SAFE DIRECTION .
•
Always keep the airgun marker “ON SAFE” until you are ready to
shoot.
•
Always check to see if the airgun marker is “ON SAFE” and unloaded
when getting it from another person or from storage.
•
Always keep your finger off the trigger and out of the trigger guard
until ready to shoot.
•
Use the proper size projectile for your airgun marker.
•
Never reuse ammunition.
•
Do not shoot at hard surfaces or at the surface of water. The projectile
may bounce off or ricochet and hit someone or something you had not
intended to hit.
•
Place the backstop in a location that will be safe should the backstop
fail.
•
Your backstop should be checked for wear before and after each use.
All backstops are subject to wear and will eventually fail. Replace your
backstop if the surface is worn or damaged or if a ricochet occurs.
•
Do not attempt to disassemble or tamper with your airgun marker.
Unauthorized repairs or modifying the function of your airgun in any
way may be unsafe and will void your warranty.
EN
Anl_Walther_P99_Paintball_2.4650_1.07_V4:Anl_CP99compact_aktuell_30
