Inserting the batteries ACL 3 RX and Laserreceiver RX 50:
Open the battery compartment (3, I) and insert the batteries in accordance
with the installation symbols, ensuring the correct polarity. Close the cover.
Horizontal and vertical levelling:
Move the ON / OFF switch (4) to the left and release the transport securing
device. The horizontal laser shines continuously. Now select the lasers (button
14). Maximum visibility of the laser lines is achieved when hand receiver
mode is switched off (button 10, control lamp 11 off).
Slope mode:
To generate slopes/gradients, the tilt function must be deactivated (button
13, tilt control lamp 12 off). The lasers will now shine continuously even if
the device is positioned at an angle for generating a slope/gradient. For
horizontal and vertical levelling, reactivate the tilt function.
B
A
C
D
E
G
F
I
AutoCross-Laser ACL 3 RX
A
Power indicator
B
Switch accuracy
short range / long range
C
LED for accuracy
green / red
D
ON / OFF switch
E
Sound ON / OFF
F
Receiver field for laser beam
G
LED’s for Laserindication (front,
side, backside)
H
Universal mount
I
Battery compartment (backside)
ENGLISH
11
H
IMPORTANT:
Make sure that the tilt function is activated (tilt control lamp
12 on). If the laser subsequently blinks, this indicates that the device is
outside of the self-levelling range of 4.5°. In this case, the device must be
placed on a more level surface.
Summary of Contents for LaserLiner AutoCross-Laser ACL 3 RX
Page 2: ...2 AutoCross Laser ACL 3 RX...
