CBF 125 AIR COOLING ENGINE SERVICE MANUAL
RENEGADE SPORT & SCRAMBLER X 125 EFI
14
.
2.7.7
Remove the open pin, oil filter, pipe and spring
2.7.8
Check if the open pin, oil filter outlet pipe and
spring are damaged. If they are, replace them with new
ones
2.7.9
Assembly the open pin, Oil filter, outlet pipe and
spring
2.7.10
Assembly the filter cover and paper
gasket. Tighten bolt
Tightening torque: 4 N.m
Note
Strange elements on the oil screen can be
used to determine preliminarily if there is
abnormal damage on the engine. If too
much metallic dust is detected, the
engine shall be subject to inspection.
The oil screen shall not be cleaned with
gasoline or other solvents that may
damage rubber.
Reinstall the right cover (refer to 6.5 section).
2.7.11
Check if bolt and sealing washer are in
good condition. Replace the drain bolt and sealing
washer, then tighten the bolt. Always replace the
sealing washer whenever renewing the engine oil.
Tightening torque engine oil drain bolt 24 N.m
2.7.12
Fill the engine with oil of equivalent
grade according to requirements of maintenance
(SJ/10W- 40); Reinstall the oil level gauge
2.7.13
Start the engine and let it idle for 3-
5minutes. 2-3minutes after stopping the engine check
that oil level is at the upper level mark in the
inspection window with the vehicle upright on firm level
ground.
2.7.14
Confirm the engine is free of any leakage.
