How to operate the element
Danger
Ensure that this element is for the SGT-100, 200 uses only.
Warning
Ensure that not to press element. (If not, it causes the deformation of
the element fabrics.)
If failed to attach element SGT-100,200, contact your local agency or
ULVAC KIKO. (If SGT is not attached properly, it causes the problem
of deformation of the element fabrics.
Ensure that not to wet the element. (If not, it causes the problem of
deformation of the element and also affects to the operation
performance.)
When installing the element, place in hard case as cardboard and
install in a place at well ventilated and dry place. (If not, it causes
the problem of deformation of the element.
Unpacking the element just before using it. Packing is degas
processing. (If not, it takes long time for vacuuming due to
absorption of the moisture in the air.)
Ensure that the element should not be cut, bonded or processed.
(If not, element does not perform well due to deformation of the
element fabrics.)
If anything from the filtering unit got into your eyes, clean with
water. Do not rub your eyes to avoid more damage to your eyes.
Consult your doctor for future advise immediately.
0-4
