Ulvac G-Tran BMR2, Instruction Manual

Page: 3 / 54

I
Prior to Operation
Upon receipt of this gauge, make sure that it is the correct model you ordered and that it is
not damaged in transit.
Read this instruction manual before installing, operating,
inspecting, or maintaining the product and fully understand the safety
precautions, specifications and operating procedures regarding the
product.
The copyright of this instruction manual is held by ULVAC, Inc.
You are prohibited from copying any portion of this instruction manual
without the consent of ULVAC Inc.
You are also prohibited from disclosing or transferring this instruction
manual to third parties without the express written consent of ULVAC
Inc.
The contents described in this instruction manual are subject to
change without prior notice because of changes in specifications or
because of product improvements.
Safety Denotations
Safety symbols are used throughout this instruction manual to call
the operator's attention to safety. The terminology used in safety
symbols is classified below.
Indicate status of urgency of danger when failure to comply with
DANGER results in serious personal injury or death
The work ignoring this warning will lead to serious damage to
human life or factory facility (including this equipment) at a high
probability.
Indicate status of danger when failure to comply with WARNING
results in serious worker’s injury or death.
The work ignoring this warning will cause possibility leading to
serious damage to human life or factory facility (including this
equipment)
Indicate status of danger when failure to comply with WARNING
results in minor injury or moderate damage.
The work ignoring this warning will cause possibility leading to minor
damage to worker or breakage to equipment or necessary to adjust.
Direct hazard is not existed, describe the necessity to know
from the viewpoint of worker’s safety or correct and safe operation of
equipment
✔ Note