ULTTY SKJ-CR021U, Manual

Page: 7 / 24

Host operation
Oscillation
When the host is operating, press and hold the screentouch button
for 1 second. The buzzer beep once and the fan starts to oscillating.
Press and hold the screentouch button again for 1 second. The buzzer
beep once and the fan stops oscillating.
Set the air volume
When the host is operating: Click the button to adjust the air volume
from 1 to 9.
Switch on and off
Connect the power supply, the LED display lights up and the machine
goes into standby mode.
Click the host's power button, the buzzer will beep once and the fan
will start.
Press and hold the power button for 2 seconds, the buzzer will beep
twice and the fan will stop running after you release your hand.
Air outlet setting
Set the wind outlet after fan has stopped.
Hold fan body with one hand and set the wind outlet 15 ° before and after.
U
S
7