Heating Mode Instructions
5
Press the warm mode button and the display shows the ambient
temperature.
Press temperature button to set the temperature, and the display
will flash digitally, which can be set to 1-30 °C.
Set temperature should be higher than the ambient temperature,
so that the heating function will be turned on;
When the ambient temperature reaches the set temperature, the
heating function will stop and keep run for 40s, then turn to
standby mode;
The ambient temperature is lower than the set temperature and
the heating function will automatically activate.
Ambient
Temperature
Set
Temperature
18
℃
20
℃
Set temperature > ambient temperature: heating function on.
Set temperature
≤
ambient temperature: heating function stops
Note: The default setting temperature is 25 °C. In the warm mode,
when the ambient temperature is below 0 °C, the display only
shows 01, do not display negative temperature value. The warm
air mode run over 9 hours, the machine will automatically stop
running. Restart by pressing the host power button or by using the
remote control.
Warm mode: use remote to set temperature, host does not support this operation.