75
Ethernet
configuration
Network:
After enabling, the phone will try to
connect network.
Ethernet configuration
: Tap the
Ethernet
configuration
button, it will pop up a "Configure
Ethernet device" dialog, and then do the following
configurations, after configuring, you can tap "OK"
button to make settings take effect.
Network devices
: Tap the
Network devices
button
then it will pop up a selection list of physical network.
The default is eth0.
DHCP:
Use DHCP to connect network.
DNS server address automatically:
Whether to use
DNS assigned by DHCP server to connect network.
Static IP:
Whether to use static IP to connect network.
IP:
Input your assigned IP address.
Netmask:
Input your assigned Netmask.
Gateway:
Input your assigned Gateway.
P i
DNS
I
i
d i
DNS
PPPoE set
Username:
Input your assigned PPPoE account
username.
Password:
Input your assigned PPPoE password.
Auto login connection:
Whether to automatically
connect PPPoE on booting.
After the configuration is completed, if you click
"Connect" button, it will connect to the network using
PPPoE mode at once;If you click "OK" button, it will
only save the configuration parameters; If you click
"cancel" button, the parameters you have been set will
not be saved.
Sound & display
Tap "Basic settings", then select "sound & display" to switch to sound &
display interface.
Configuration item
Meaning
Volume Set
Silent mode
: Set whether to enable Silent mode.
After enabling the function,
all sounds will not take effect expect media volume
and alarm clock.
Ringer volume:
Adjust the volume size of
incoming call.
Media volume:
Adjust the volume size of media.
Ring Set
Phone ringtone:
Set telephone ringtone of
incoming calls.
