background image

www.ultratecfx.com

4

Exterior

The casing of the Versa Fan/Versa Fan DMX is steel with a powder paint coating. To clean simply wash with 
mild soap and warm water. 

Ensure the power is disconnected when cleaning!!!

Maintenance Procedure

Troubleshooting

Not Powering Up:
1) Check power cord is securely inserted into Fused Power Entry Module and connected to an        
     appropriate power source.
2) Check that fuse inside Fused Power Entry Module is not open / blown.    Replace fuse if open.
3) Check that speed control dial is not in OFF position.
4) If Versa Fan DMX version; check that power switch is in ON position on DMX box and that fuse 
    on DMX box is not blown / open.

IF FAN NOT TURNING: 
1) Check that speed control dial is not in OFF position.
2) If Versa Fan DMX version; check that power switch is in ON position on DMX box and that fuse 
    on DMX box is not blown / open. 
3) Check that DMX address is set to correct address being used.
4) Verify that Valid DMX LED is ON solid confirming good DMX signal. If red Valid DMX LED is blinking     
     continuously, unit is in Stand Alone Mode and will not respond to DMX. Power unit off and reset selected 
     DMX address. Power back up and ensure solid red Valid DMX LED.
5) Verify that correct DMX address is being sent to unit from DMX console.
6) If using Stand Alone Mode, ensure that red Valid DMX LED is blinking continuously to indicate that unit is    
    in correct mode. 
7) Check that fan blades are not full of dust / debris.  Clean fan blades (Ensure unit is 
     disconnected from any power source).
8) Look for visual damage to fan blades / motor.
9) Contact Ultratec Special Effects Service Department.

The Versa Focus

 

an easy to install

 

accessory when a more focused flow of air desired.

 

CLF-2788 Snow/Versa DMX Truss Bracket Heavy Duty

CLF-2815 Versa Focus

The Snow/Versa DMX Truss Bracket allows you to hang your Versa Fan DMX where you 
need it most!

Accessories

CXP-4139PIN PowerShowStage Fogger Remote 5-PIN

CXP-4139PIN Power/ShowS/tage Fogger Remote 5-PIN can be used for remote control of the Versa Fan DMX when no 
DMX network is available.

Summary of Contents for Versa Fan









Reviews: