Setting pulse/tone dialing
The Miniprint 425 is set for tone dialing, which is correct for
almost all telephone lines. But you can change to pulse
dialing if your line does not accept tone dialing.This setting
remains changed until you change it again or reset the
Miniprint 425 or you lose power. Follow these steps to set
pulse dialing:
1.
Press the options key (
+
).You will see PRINT
(UP/LOW) CASE on the display.
2.
Press the
key until you see USING ( TONE) DIAL on
the display.
3.
Press the
to change the option.
4.
Press the
key to save the new setting and leave
options or press the
key to save and go to the next
option.
Setting the number of auto-answer
rings
Follow these steps to change the number of auto-answer
rings to any number between 2 and 9:
1.
Press the options key (
+
).You will see PRINT
(UP/LOW) CASE on the display.
2.
Press the
key until the display says AUTO ANSWER
RING (2).
3.
Press the
to choose a number between 2 and 9.
4.
Press the
key to save the new setting and leave
options or press the
key to save and go to the next
option.
Turning off Turbo Code
Follow these steps to turn off Turbo Code:
1.
Press the options key (
+
).You will see PRINT
(UP/LOW) CASE on the display.
3
Ctrl
Return
Esc
Spacebar
Return
3
Ctrl
Return
Esc
Spacebar
Return
3
Ctrl
2 6 • O P T I O N S
Summary of Contents for Miniprint 425
Page 1: ...305 002903 USING YOUR MINIPRINT 425...
Page 14: ...1 2 S E T U P...
Page 24: ...2 2 C A L L I N G...
