4
CrystalTone Ringer
™
Training Guide
Step 1 – Selecting the Location
CAUTION!
Do not plug the
CrystalTone Ringer
into any telephone line other than a typical, analog
telephone line. Connection to a digital system may damage the ringer or the telephone system and will void
your warranty.
Set up the
CrystalTone Ringer
in a place where: (a) There is a phone jack nearby. Cords should not lie
across any walkway. (b) The surface that the ringer is set on, or mounted to, is stable and secure. (c) The
area is protected from excessive heat or humidity.
Step 2 – Setting up the
CrystalTone Ringer
Placing on a desktop
1. Plug the telephone line cord into the telephone line jack on the bottom of the
CrystalTone Ringer
and the other end into the wall phone jack.
2. Set the
CrystalTone Ringer
on a sturdy surface such as a desk. It may be
placed on its side or flat.
Mounting on a Wall
Use the previous instructions with the following exceptions:
1. Select a spot within a few inches of the wall phone jack.
2. Using the template below, drill 2 holes that are 2.3 inches apart. Use a
3
/
16
"
drill bit.
3. With a hammer, tap the plastic wall anchors into holes until flush with wall.
4. Using a Phillips head screw driver, insert screws into the anchors until head
of screw is
1
/
4
" from wall.
5. Align holes on back of
CrystalTone Ringer
with screws and hang the ringer on the wall.
INSTALLATION
2.3 inches
Use
3
/
16
" drill bit.
