28
Power ON/OFF
Hardware Reset
To get started with the GPS Computer, please follow the steps described below:
1. Install
@trip PC
and
Sports Analyzer
software from the CD.
2. Connect the GPS Computer to your PC using the USB cable.
3. Keep the GPS Computer connected to PC and charge for at least 4
hours prior to first use.
4. Unplug the GPS Computer from PC once fully charged, and press the
Power/Menu
button for 2 seconds to power on.
5. On the GPS Computer, select a display language, set the time, and
select a measurement unit standard.
1. The GPS Computer automatically turns on when a battery is inserted
or connected via USB.
The GPS Computer will start logging once powered on.
2. The GPS Computer automatically re-starts logging (counter/pedometer/
GPS data resets, etc.) at 00:00:00 everyday.
•
Pressing down both the
Up
and
Power/Menu
buttons simultaneously for
5 seconds resets the hardware settings.
Note: Before setting time, please go outdoors to obtain a GPS fix first.
Getting Started with GPS Computer
