DSX BACK PANEL
X-DRIVER:
This jack is for connection to a non-powered extension speaker like the
Ultrasound XTC
. This
jack provides a “speaker level” signal. The minimum load that can be driven is 4 ohms.
EFX F.S. (FOOTSWITCH):
This jack is for connection to a shorting footswitch. When the switch is closed,
the on board digital EFX will be bypassed.
EFX SEND:
This jack provides an unbalanced output signal from the
CHANNEL-2
preamp for supplying
signals to external low-level effects or signal processing equipment. This signal is “pre” tone controls. (The
tone controls will not affect the EFX SEND signal)
EFX RETURN:
Input for “returning” signals from external low-level effects or signal processing equipment.
This signal is pre tone controls and EFX.
(CHANNEL-2 tone controls and on board digital EFX will affect this signal)
LINE OUT:
This jack provides an unbalanced output from the preamp that is post eq and post efx. This
signal is pre MASTER VOLUME which means that this signal will not change with the MASTER VOLUME
setting. This send can be used to feed a signal to a recording or sound reinforcement mixer. Additionally
this output can be used to drive a slave amp or powered extension speaker.
DIRECT OUT:
Balanced output signal used to feed recording or sound reinforcement equipment. This
signal is post eq and post efx but is pre MASTER VOLUME.
TAPE/CD
: Unbalanced phono (RCA) input jacks. This is an auxiliary input designed for use with a drum
machine, tape player, CD player, etc. and can be used for playing prerecorded music.
TAPE/CD LEVEL
: This “inset” control adjusts the volume level of the TAPE/CD input. This control can be
adjusted with a small screwdriver. This signal is pre MASTER control which means that the MASTER
volume setting will affect the loudness of the TAPE/CD input signal.
AC INPUT:
Connect the female end of the AC line cord here. Connect the male plug to a suitable source
of line voltage. Refer to the voltage information on the back of the amplifier for its voltage and current
requirements. This connector also acts as the main fuse holder and includes a compartment for a spare
fuse.
POWER:
This rocker switch turns the AC power ON and OFF.
