Ultrasonix SonixMDP, Service Manual

Page: 59 / 182

SonixMDP/SP/OP Service Manual 00.053.101, Revision C Chapter 7: Field Service Components
7-5
7.1.3 Exporting Patient/Exam Data (As Required)
Exam Import/Export enables data to be copied to and from the system from within the system software, allowing
the creation of Patient/Exam data backups.
Equipment/Tools Required:
• USB media (memory stick, external hard drive, etc.).
To Export all Patient/Exam Data Using SonixMDP/SP/OP Software:
1.
Press the console button.
2.
Select Import/Export .
3. Select all Patients/Exams .
4.
From the Source drop-down menu, select Local Patient Data .
5. From the Destination drop-down menu, select the Export Destination .
6.
Select the Export button to begin the backup.
7.
When the Export is complete, the following message will be presented.
Note: When creating a backup prior to servicing the modulo, be sure to select all Patient/Exam data currently
stored on the system.
If Patient/Exam data is exported using these instructions ( 7.1.3 ), it will not be necessary to use the Backup
option ( 7.1.5 ).
Note: Local Patient Data is the only Source for exporting data.
Note: The Delete On Export Options will not be available for selection until a valid Destination location is
selected.
To create a backup without removing the data from the system, leave both Delete On Export Options
unchecked.
Note: If Delete On Export Options were selected, the data will be deleted before the Export process is
complete message is presented.