Property of Ultrasonic Power Corporation -
© 2021
Publication Number UPC211216-005
22
6.2. MODEL 5300/5400 GENERATOR
NOTE:
Use the following procedure
whenever the generator is not operating properly.
Do not attempt to do more than is listed below as it may void the warranty.
1. Remove
power
from
the
system.
2. Check fuses (on control panel and on back of
generator), replace if necessary.
3. Check for loose connection of wires.
4. Check supplied power for correct voltage specifications.
5. Test generator by turning the system on.
6. If generator does not work, contact Ultrasonic Power Corporation service
department for repair or replacement.
NOTE: DO NOT
open the generator as this
will immediately void the warranty of the
generator.
6.3. VIBRA-BAR
®
TRANSDUCER PACK
1. Remove power from the system.
2. Check transducer stacks for damage and loose
wires.
3. If damage is visible or capacitance is low, contact
Ultrasonic Power Corporation service department for repair
or replacement.
