Property of Ultrasonic Power Corporation -
© 2017
Publication #170119-jsw
21
9. Maintenance
P
OWER
Be sure to depress the main power button and unplug the system prior to any servicing of the
unit. Disregarding this step may lead to electric shock.
This machine utilizes high voltage to operate the ultrasonic transducers. Only trained and
qualified personnel should attempt any repairs or servicing of the ultrasonic components.
Be careful when cleaning the ultrasonic tank to not scratch or abrade the ultrasonic radiating
surface, as this will reduce the life of the radiating surface.
Preventative Maintenance
The design of your UPC equipment eliminates the need for elaborate preventative maintenance
procedures.
•
After each use, you should wipe down your machine with clean water and towels.
For Generators:
•
Blow out the internal parts of the generator with an air hose. Careful use of air pressure
may be used to remove dirt from critical areas. Periodically check the generator air intake
for buildup of dust and/ or debris. Recommended maintenance cycle is 3 months or 500
hours. For environments that has a lot of dust and/or debris, check more periodically.
G
ENERAL
M
AINTENANCE
•
To prevent build-up of contamination on tank walls; reducing the cleaning capabilities, it
is advisable to periodically drain the tank solution and wash out the tank. Use paper
towels and clean water.
•
Remove and clean the pump filter each time the tank is drained (replacement filters may
be obtained from Ultrasonic Power Corporation).
•
Blow out dirt and dust from the fan of the generator using an air hose or compressed air
(Do not open the generator without expressed permission of Ultrasonic Power
Corporation. Doing so will immediately void the generators warranty).
•
Check plumbing components for abnormal wear and tear.
WARNING
NOTE:
