Property of Ultrasonic Power Corporation -
© 2017
Publication #170119-jsw
22
10. Troubleshooting
•
There is not any power to the unit.
1.
Ensure the power cord(s) are plugged into its proper voltage supply.
2.
Press the "Ultrasonics" switch to the "ON" position.
3.
If the above did not solve the problem: Call the Ultrasonic Power Corporation
customer service department for assistance.
•
The Ultrasonics does not run.
1.
Ensure the generator power cord(s) are plugged into its proper voltage supply.
2.
Make sure that the coax cable is properly plugged into the generator and the tank
(H model only).
3.
Press the "Ultrasonics" switch to the "ON" position.
4.
Rotate the power intensity knob clockwise (if applicable).
5.
If the above did not solve the problem: Call the Ultrasonic Power Corporation
customer service department for assistance.
•
The liquid does not heat up.
1.
Ensure the tank power cord is plugged into its proper voltage supply.
2.
Press the "Heat" switch to the "ON" position.
3.
Rotate the heat knob clockwise (If applicable).
4.
If the above did not solve the problem: Call the Ultrasonic Power Corporation
customer service department for assistance.
•
The pump does not work
1.
Attach all plumbing parts to their proper locations.
2.
Make sure that the pump has been "Primed" and that there is liquid in the tank.
3.
Ensure the pump power cord is plugged into its proper voltage supply.
4.
Press the "Pump" switch to the "ON" position.
5.
If the above did not solve the problem: Call the Ultrasonic Power Corporation
customer service department for assistance.
