6
ULTRASONICPOULTRYSYSTEMS.COM
DO NOT PRESS HARD!
Excess pressure will
result in a poor weld.
QUICK START
INSTRUCTIONS
Getting started/How to Use
1.
Place the tip onto the belt to be welded and
apply light pressure.
2.
Still
applying light pressure
, press the red
start button and
hold light pressure
for 1-2
seconds.
3.
Release the switch and
apply higher
pressure - hold for 1-2 seconds to allow weld
to cool.
TROUBLESHOOTING
A. System is not welding
I. Verify system is plugged in (110-240VAC)
II. Verify power switch is on is light
illuminated.
III. Confirm tip is properly tightened.
IV. Pressing too hard.
V. Check tip-is-tip worn?
VI. Allow tip to cool
If you are still having issues, please call
Technical support at 614.549.0627
3971 Hoover Rd. #291. Grove City, OH 43123
