UltraPower Planet Green PG-805, User Manual

Page: 16 / 20

6 7
The USB Remote can be used in two different ways.
1. It can be used free standing or as a wall
mounted switcher. You can simply turn
the energy saver On/Off with a quick
press of its top button.
2. Or connect the USB remote to one of the
main components with a USB port such as
a TV, computer or laptop.
When the USB Remote is plugged into the
component’s USB port, it detects power on
the connected port and sends On/Off signal
instructions to the PG-805.
The Energy Saver function shuts down about 2.5 minutes after the
main USB component is turned off, allowing enough time to shut
down peripheral components if desired.
Some USB ports may have continuous power, this is indicated
when the USB remote continues to light up after the equipment is
turned off. This means the USB port will not work with the PG-805
– please use another USB port or trigger device.
Remote Controller’s Range
The USB Remote works within a
range of up to 25-feet, this may vary
depending on room layout, building
materials and local interference.
Using the USB Remote
Learning Button
The “LEARNING” button has two functions:
1. To synchronize with the USB remote
2. Manual switch for the Energy Saving Outlets
Synchronizing USB Remote with PG-805
The USB Remote and the PG-805 arrives paired and ready to
use. To synchronize the Remote with the PG-805*, position
them near each other and follow the steps below.
1. Turn on the TV, computer, laptop or any USB component
(trigger device) before synchronizing.
2. Press and hold the “LEARNING” button on the side of
PG-805 for five seconds. The blue “Energy Saver” LED will
start flashing, then release the “LEARNING” button.
3. Press the button on the USB remote or connect the USB
Remote directly to the main component’s USB port within 5
seconds. Once the remote detects power in the component,
it will send a wireless code to the PG-805.
4. Once the PG-805 has successfully learnt the code from
the remote, the blue “Energy Saver” LED will change from
flashing to solid.
* You can synchronize multiple PG-805 with a single Remote.
It is important to note that each PG-805 surge protector must be
plugged directly into an AC wall outlet and not daisy-chained together.
Operating
25-f
eet