5
w
w
w
.ul
tral
u
x.bg
5
w
w
w
.ul
tral
u
x.bg
3.
Continuously to press the key
On
for 3 times within 5 seconds the brightness of LEDs will change
from 25%, 10%, after the third press, the light will blink 3 times and then go to the state where it
was last.
4.
If match code unsuccessfully, please re-operate above steps (Notice: Power on driver to enter
match code state should after at least 30 seconds from the last time power off).
Clear code operation
Clear code between the driver and remote control is for backing to factory default. After clear code
successfully, the driver can be controlled by anyone the same model remote control or the remote control
not the same model but compatible with each other.
1.
Connect the driver with load LED (without power on).
2.
Pressing the key
Mode
and power on the driver, the load LEDs will be 50% brightness white as
responding. Means entered the clear code status successfully.
3.
Continuously to press the key
Brightness -
for 3 times within 5 seconds, the brightness of LEDs will
change from 25%, 10%, after the third press, the light will blink 3 times and then go to the state
where it was last.
4.
If not, please re-operate from step 2 to 3 (Notice: Power on again the driver to enter the code
learning status should be 30 s after last power-down). Anyone the same model remote control or
the remote control not the same model but compatible with each other can be used to clear code.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
•
The product and its components are not harmful to the environment.
•
Please dispose the package elements separately in containers for the corresponding material.
•
Please dispose the broken product separately in containers for out of usage electrical equipment.
WALL-PANEL INSTALLATION INSTRUCTION
With a mounting box included in the set
1.
Fixing the mounting box into the wall.
2.
Fixing the metal frame into the mounting box
with screws (projecting part upward).
3.
Pressing the wall-panel into the metal frame, after connecting well the input and output wires.
