2
w
w
w
.ul
tral
u
x.bg
2
w
w
w
.ul
tral
u
x.b
g
MARK:
1.
All static modes are adjustable, press the color button one time, the brightness changes one level in circle, 4
levels (100%, 50%, 25%, 12%and 6%);
2.
S+ /S- means speed adjust key for the dynamic functions, and means sensitivity adjust key for the music
functions;
3.
Sound control I (FT) - fast track, Sound control II (MT) - my track, Sound control III (CT) - cool track; different
button for different music and different mode;
MATCHING CODE OPERATION
Receiver can be controlled by any one the same remote as factory default; remote control delivered with unique RF
code as factory default. If unique-control or new-coded-remote is needed, pairing the remote and the receiver as
below operation instruction before using:
1.
Pressing key “FLASH” and hold on, power on
the controller, the load LEDs will be 50% brightness white as
responding;
2.
Pressing
“FLASH” 3 tim
es in 3 seconds, corresponding to the operation, the LED's brightness will change as
25%-10%-back to preset level;
3.
Code learning successfully, the receiver only can be controlled by the remote;
4.
If not, please re-operate from step 1 to 2;
CLEAR CODE OPERATION
Back to factory default, receiver can be controlled by any one the same remote control:
1.
Pressing key “BLOOM”
and hold on, power on the controller, the load LEDs will be 50% brightness white as
responding;
2.
P
ressing “BLOOM” 3 times in 3 seconds
, corresponding to the operation, the LED's brightness will change as
25%-10%-back to preset level;
3.
Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can be
controlled by any remote control (any one the same remote control can be used to clear the code);
4.
If not, please re-operate from step 1 to 2;
NOTES
•
Supply voltage of this product is 12-24 V DC, never connect to others.
•
The wires should be correctly connected according to the wiring diagram.
•
Do not install on flammable surfaces.
•
Do not cover the power supply. Provide enough space for heat dissipations
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
•
The product and its components are not harmful to the environment
•
Please dispose the package elements separately in containers for the corresponding material.
•
Please dispose the broken product separately in containers for out of usage electrical equipment.
