Fold & Go Model 760 PowerChair Owner’s Manual
EMC Part: 19272200 • Rev. 01 • 01/05/04
13
Charging Battery
Although the vehicle ships from the factory with the Battery fully charged, it may have become discharged during transit,
storage, etc. Use the following to charge the Battery before driving. The Model 760 provides two methods of charging
the battery. The charger can be connected directly to the Battery Pack, either on or off the power chair; or when
mobility is a concern, the battery can be recharged through a connection on the underside of the joystick controller.
Battery Charging — Battery Pack Connection
1.
Locate and identify the separate Battery Charger and
AC line cord that accompanies the vehicle.
2.
The Battery can be charged either on or off the vehicle.
If more convenient, detach Battery from vehicle and set
on dry, flat surface accessible to an electrical outlet, as
shown in Figure 5.
3.
Locate Charger connection on left side of Battery
housing. It is covered by a round, sliding door labeled
“Charger.” Battery Pack charging connection on vehicle
is shown in Figure 5.
