AutoGo 550 Vehicle Owner’s Manual
EMC Part: 19285600 • Rev. 03 • 09/15/04
13
Installing & Setting the Dashboard Clock
Your AutoGo 550 comes with a removable, battery-powered, quartz clock that mounts directly in the dash. This clock is
packed separately to allow you to set it to your local time before installing in the dash.
Setting the Clock
— Locate the bag containing items packed separately with the vehicle. Unwrap the clock from its
protective packing. If clock includes a small, plastic collar around stem, remove collar and push stem “in” to start clock.
Set clock to your local time by pulling stem out and turning to adjust hour/minute hands. Push stem in to start clock.
Installing the Clock
— When you have set the clock to your correct, local time, you can install it in the dash of your
vehicle. Install the clock into the location adjacent to the Speed Control. The rubber gasket is sufficient to secure the
clock in place. Make sure the “12” faces “up.”
19285600 Rev.03.OM
9/15/04, 5:35 PM
13
