Wood wall installation:
If you are mounting to a wood wall surface, make sure that the area you wish to mount to does not contain any water piping/internal cables.
2.1 Use a stud detector to determine where the stud is to drill into the structure.
2.2 Determine the height and positioning of the wall bracket. Draw a marking where you wish to place your bracket.
2.3 Use an electric drill along with a 4.5mm wood drill bit (Mark the drill bit with a piece of coloured tape to the 60mm mark, this will
indicate how deep your wall plate hole needs to be drilled) Then drill into the wall (60mm) to the depth of the coloured tape.
2.4 Position the wall plate and use the spirit level (Hardware K) to insure that the wall plate is leveled.
Use a screw driver & (Hardware B) ST5.3x40mm x 2 to screw in towards the right to tighten screws and secure the wall plate
Using Screw (F) and nut (E), Assemble
mount & Extension bar together.
Using Long bolt (C or D) washer (H) and
spacer (G) to mount TV set to the panel.
F
G
H
C D
I
H
J
E
TV
THE BELOW HARDWARE IS NOT INCLUDED WITH THE PRODUCT
NOTE: Proof of purchase is to be produced before any claim. This product carries a ten year warranty
for Manufacture faults/failures.
UL-DB2350 Product weight:1.1kg; TV size support:23"-50"; Distance to the wall:
43-402mm; Maximum load:20kg; For VESA standard:200X200mm
Using the M6 X10mm screw (I) , the
ψ6 washer (H) and (J) plastic washer
assemble the wall plate to the
mount plate as illustrated.
2.1
2.2
2.3
2.4
