Smartphone/Tablet connection
(continued)
If the data on the page appears to be garbled (ie: not quite fitting on the screen, or wrapping
onto multiple lines), you may have to adjust the display size.
In
vSSH
on IOS, this is done by changing the Width and Height parameters to
80
and
25
in
the settings menu, as discussed previously.
In
ConnectBot
, simply tap on the menu (three dots to the top right), and tap
Force Size
:
If you
’
re asked for Width and Height numbers, enter
80
for the width and
25
for the height
–
These should already be the default settings.
You can now plug the WNTD antenna into the gateway, and after about a minute of boot-
up garbage, the RF Qualification page will load:
