11
bushing(s) to ensure that water cannot penetrate into
the camera base.
D. Attach the base of the camera to a wall, ceiling, or post using
an appropriate fastener through the mounting holes in the
base. See figure 4. The camera must be attached to a
structural object, such as a wall stud or ceiling rafter, that
supports the weight of the camera and mount.
FIGURE 4. ATTACHING THE BASE
E. Strip the video coaxial cable and connect to the camera as
illustrated in figure 5. Fold the shield over the insulation as
shown.Use only RG59/U type cable for the video signal.
FIGURE 5. CABLE CONNECTIONS
F. Wire the 24V AC power supply to the AC power connector on
the back of the camera as shown in figure 5. Use only a UL
listed Class 2 power transformer.
3 -1/2”
3 - 1/2”
Base
Anchor
1/4”
1/4”
13/64”
CAUTION
Connect to class 2 supply only
Summary of Contents for TVC-500
Page 6: ...6 TABLE OF CONTENTS...
