![Ultrak KR4096HN-A Operation Instructions Manual Download Page 23](http://html1.mh-extra.com/html/ultrak/kr4096hn-a/kr4096hn-a_operation-instructions-manual_3470540023.webp)
19
Advanced Functions
Reference page
<SEARCH FUNCTION>
COUNTER MEMORY STOP
SKIP SEARCH
INDEX SEARCH
TIME DATE SEARCH
Turn the SHUTTLE RING
to go the search menu.
Press STOP to exit.
<TIME DATE SEARCH>
TIME
00:00
DATE
13
DIRECTION
REVERSE
Use JOG to adjust,
and ENTER.
<TIME DATE SEARCH>
TIME
03:25
DATE
24
DIRECTION
FORWARD
Use JOG to adjust,
and ENTER to start.
Time date search
You can easily find a picture recorded at specific date and time.
1. Press SEARCH button until TIME
DATE SEARCH is highlighted.
•
The Time Date Search indicator ( )
illuminates on the fluorescent
display.
2. Turn SHUTTLE to the right.
•
<TIME DATE SEARCH> menu
appears.
3. Turn JOG to set
hour digits of TIME
you wish to find and turn SHUTTLE to
the right.
To exit the <TIME DATE SEARCH>
menu without searching, turn
SHUTTLE to the left several times.
4. Set
10-minute digit and 1-minute digit of TIME, DATE and
DIRECTION in a similar fashion.
•
Searches in the forward direction of
the tape when DIRECTION is set to
FORWARD.
•
Searches in the reverse direction of
the tape when DIRECTION is set to
REVERSE.
5. Turn SHUTTLE to the right to start
searching.
•
When the recorded picture is found, it is shown at still
picture.
To quit while searching, press STOP button.
Note
•
An index mark is written on a tape at each hour (1:00, 2:00
and so on) during recording. The time date search cannot be
resumed if the index mark of the hour (set in step 3) is not
recorded on a tape.
Example: When the VCR recorded from 8:15 to 17:30 on a
tape, only pictures recorded between 9:00 and 17:30 can be
found using the time date search.
•
The time date search may not function correctly, if you use a
tape with a poor recording quality or with alarm recordings
recorded at several recording mode.
•
The time date search will not function when using a tape
recorded with other VCRs or a tape recorded without setting
the current day and time.
Info.
•
When the desired part of the tape is not found in the selected
direction, the VCR automatically searches in the opposite
direction.