8
3.2
BASIC
INSTALLATION,
continued
7.
Plug the cable into the connector port labeled
MONITOR located on the back of the camera.
8.
Plug the other end of the cable into the
corresponding camera connector port on the back of
the observation monitor.
9.
Plug the monitor’s power cable into a suitable wall
outlet.
10.
Turn on the monitor’s power switch(es). The monitor
should display images for the connected camera(s).
For more information on system installation and
camera display options, refer to the observation
monitor or system manual.
11.
Adjust the lens focus and iris control for an optimum
picture.
3.3 MANUAL
IRIS
LENS ADJUSTMENT
A manual iris lens is used in indoor applications where
lighting from windows can considerably affect the light
level of the room. When using the manual iris lens,
perform the following:
1.
Set the EI switch to ON.
2.
Turn the iris ring on the lens to the fully OPEN
position
3.
Focus the lens to obtain optimum picture.
4.
To increase the camera’s depth of field, slightly close
the manual iris by approximately five to ten percent.
