Press A to start, the display is as shown in Fig.16.
Fig.16.
Press B to get the 1st LAP time at the top row and the speed at the middle row, as
shown in Fig.17. If for example the distance is set to 200 meters and time unit set is
in seconds, the speed calculated from a LAP time of 17.09 seconds is 11.70 m/sec.
Using the B button the LAP times and their corresponding speeds can be displayed.
Recall operations in the SPEED mode are the same as that in the LAP/SPLIT mode.
Fig.17.
**
BASE 3 STROKE/FREQ
-- if the distance is set to 180 and time unit to seconds, the
speed reading for 3 strokes gives the number of strokes / minute.
**
MEMORY USED UP
-- When all the memories have been used the 4 digit LAP
counter at the top left corner will start blinking to indicate all memories have been
used up. All further LAP memories will not be recorded in the memory unless
some memories are cleared as previously indicated. When there is no memory
left pressing A to start a race will sound 3 short beeps.
**
Do not
leave the stopwatch running
if not in use
as that drains a higher power
from the battery.