Ultraflux Minisonic 2000, User Manual, Page: 25 / 27

NT217 C GB1 25 / 27
10 - INVESTIGATIONS
If there is a difficulty or a problem, logical analysis can be assisted by the
implementation of expert apparatus:

Either an oscilloscope: the MiniSonic has internally on its P.C. Board test points :
PT 0 = 0 Volt
– Ground
PT 1 = Selection windows. Echo must be inside.
PT 2 = Synchro
–Positive edge 0 to 5 Volt
PT 1 = Selection windows. Echo must be inside.
PT 3 = Emission < > Reception transit time.
PT 4 = Echo
– Alternating signal , peak to peak max = 4 Volt / 0.65 V negative
threshold.

Echoes display investigations can also be done by using a DigiSonic E / P portable
flowmeter

This device permits also ultrasonic thickness gauge option.

Or measuring instruments for dimensional or alignment measurements
SPARE PARTS :
Ultraflux offers possibilities of purchasing spare cards or, as long as acceptance is
granted, the standard replacement of equipment in the event of failure.

Contact the Ultraflux commercial services or the regional dealer.