16
Power Lift Chair Operation Model UC486
1. To recline your chair
, press the down button (S2) and
hold until you reach your desired position. Then release
the button.
2. To return to a seated position from recline
, press the
up button (S1) and hold until the chair returns to a closed
seated position. Then release the button.
3. To lift your chair
, press the up button (S1) and hold until
you reach your desired height. Then release the button.
4. To return to a seated position from lift
, press the
down button (S2) and hold until the chair returns to the
floor seated position. Then release the button.
5. To lift your chair from a reclined position
, press the
up button (S1) and hold. The chair will keep going past
the seated position and start to lift. Release the button
when the chair reaches the desired height.
6. To recline your chair from the lift position
, press the down button (S2) and
hold. The chair will keep going past the seated position and start to recline.
Release the button when the chair reaches the desired reclined position.
7. Getting into your lift chair.
While standing next to your chair, press the chair
up button (S1) and raise the chair to a height you can sit against. This height will
vary from person to person depending on the individual’s needs. Raise the chair
high enough so you do not have to flop down into the chair.
Flopping down
into the chair will damage it and could cause personal injury.
Press the
chair down button (S2). As the chair continues downward, adjust yourself into a
position that is comfortable to you. Continue pressing the button until chair is in
the seated position (chair firmly on the floor), then release the button.
8. Getting out of your chair
, press the chair up button (S1) and raise the chair to
a height that enables you to easily stand. Release the button. Return the chair
to the seated position (chair firmly on the floor) after getting out of the chair so
children, pets or obstructions do not get under the chair.
HEADREST
1. To move the head rest up and out.
Press button (S3) and hold it until the head
rest reaches a position suitable for you, then release the button.
2. To move the head rest down and in.
Press button (S4) and hold it until the head
rest reaches a position suitable for you, then release the button.
LUMBAR
1. To move the lumbar out.
Press button (S5) and hold it until the lumbar reaches
a position suitable for you, then release the button.
2. To move the lumber in.
Press button (S6) and hold it until the lumbar reaches
a position suitable for you, then release the button.
Note: Your UltraComfort power lift chair can be stopped at any time
during lift or recline by releasing the selected button, offering you a wide
range of comfortable positions. Select the position that best suits your
S1
L.E.D.
light
S2
S3
S4
S5
S6
PA
TENTED
PA
TENTED
