UltraBrite 2311393, User Manual

Page: 4 / 17

4
Operation Instructions:
1. Use this product only on a firm, level surface and prevent any objects or
materials from covering the light source and/or ventilation holes of the
product.
2. Connect the AC adapter input into the connector in the rear of the lamp.
Plug the AC adapter into a standard household 120V AC outlet. Note: Use
only with the supplied AC adapter to avoid damage or fire.
3. Touch On/Off to turn on the lamp.
4. Touch control button to adjust brightness. There are five levels of
brightness.
5. Touch to switch between 3 light temperature modes: Warm, Natural,
Bright light.
6. Touch to activate low level night light.
7. Touch once to activate Chroma RGB mood light. Touch once
again to hold current color. Touch to deactivate Chroma RGB mood
light.
8. Touch On/Off to turn off.
Wireless Charging Specifications:
Output: 1.0Amp, 5 Volt.
Place the Qi compatible device over the wireless charging icon ( ).
When the device begins charging, the device will indicate that charging is
active. This feature will not charge all Qi compatible devices. Please refer to
your device instructions for enabled capability. Device case or cover should
be removed to ensure a stable connection.
Charging Status LED Indicator (located near power adapter port)
Without light
- Wireless charging is on standby.
With light - Wireless charging is active. Device will indicate charging is active.
Fast flashing - Abnormal operation. Recheck device position, remove cover,
or check Qi compatibility with your device.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.
All rights reserved.