Ultra UX9, User Manual

Page: 30 / 33


SIM1 Lock : Choose security setting under this Menu to avoid unauthorized usage of mobile
phone or SIM Card.
The 4-to 8-digit PIN (Personal Identification Number) protects your SIM card against
unauthorized use. When this feature is enabled, the phone requires your PIN each time it is
switched on.
Attention : If you enter an incorrect PIN/PIN2 three times in succession, the SIM card is
blocked. To unblock it, you need to enter your PUK/PUK2 (Personal Unblocking Key). The codes are
supplied by your network operator.

Fixed Dial : If supported by your SIM card, Fixed Dial mode restricts your outgoing calls to a
limited set of phone numbers. When this feature is enabled, you can make calls only to phone
numbers stored in
Fixed Dial List .
-
Mode : enable or disable the feature. (PIN2 code is needed).
-
Fixed Dial List : sett the fixed dial numbers.
Attention : you need PIN2 code to enable or disable the feature. The PIN2 code is supplied by
your network operator.

Barred Dial : If supported by your SIM card, Barred Dial mode forbids some numbers to dial.

Change Password : change the PIN/PIN2 code.
II. SIM2/UIM SECURITY SETUP:
The operations are with SIM1 security setup. SIM2 security setup not include Barred
Dial . UIM security setup not include Fixed Dial and Barred Dial .
III. PHONE LOCK:
The Phone Lock feature locks the phone from unauthorized use. When this
feature is enabled, you must enter a 4- to 8-digit phone password each time the phone is switched on.
The password is preset to 1234. To change the password, use the
Change Password menu.
IV. AUTO KEY LOCK:
Turn on or off the function of locking the keypad automatically. You can set the waiting time to turn
on the function.

Lock
-
The keypad will be locked automatically after the waiting time.
-
Press Left soft key and then * key or hold Space key to lock keypad manually in idle mode
(only the SIM card is active).

Unlock
-
Press Left soft key and then * key to unlock.
V. CHANGE PASSWORD:
Change the phone lock password
.
VI. DATA PROTECT:
Press Left Soft Key or Ok key to access the following options:

DataLock : turn on or off the function. The password is preset to 1234.

Protect Object : User may select the objects that need to be protected by password. The
password is preset to 1234.

Change Password: change the code. The password is preset to 1234.
Once select this function, password must be inputted every time the function is switch on.
Attention: The Data Lock and the protected objects are turned on at the same time
r4. RESTORE FACTORY SETTINGS:
Use this menu to reset all settings in your phone to default setup. The password is preset to