S
EQUENTIAL
T
HERMOSTATIC
S
HOWER
V
ALVE
Owner’s
Guide
9
See
Page
11
See
Page
10
•
Connect the hot and cold water supply
feeds to the shower valve using swivel
connector.
•
Fit the shower valve to the wall peg and
secure by tightening the grub screw
using the Allen key provided.
Fit blanking plug.
•
Make connection to shower
outlet, using swivel connector.
•
Check for any leaks.
EXPOSED VALVE
Site Preparation
CONCEALED VALVE
Site Preparation
For use with flexible hose, the
sequential thermostatic shower
valve should be installed with the
connection in the downward
position.
It must be remembered that the
location of the hot and cold water
inlets will be reversed.
(see illustration left)
•
Connect the hot and cold water supply
feeds to the shower valve, using swivel
connector.
•
Fit the shower valve to the wall peg and
secure by tightening the grub screw
using the Allen Key provided.
•
Make connection to shower outlet,
using swivel connection.
•
Check for any leaks.
N.B. Please ensure that the area around
the concealed valve is not filled in.
Access must be left for servicing
purposes.
The sequential thermostatic
shower valve can be installed with
the connection in the downward
position. It must be remembered
that the location of the hot and
cold water inlets will be reversed.
(see illustration left)
15mm
Connection to
Cold Supply
15mm
Connection to
Hot Supply
Hot
Supply
Cold
Supply
15mm
Connection to
Cold Supply
15mm
Connection to
Hot Supply
Swivel Connection
to outlet
Hot
Supply
Cold
Supply
