Page 8 of 14
If nylon strap is used, it should have a loop sewn in one end and be attached using a 3 /8" x 3" or
1 /4" x 2-3/4" long bolt and locknut. Use a locknut, not a nut, and lock the washer. Insert bolt
through slots in both reel side plates so that nut is on gear side.
Tighten only until snug with bolt in bottom of slot next to reel hub.
Main Parts of Winch
Reference
Subassembly
1
Crank handle
2
Ratchet switch
3
Axis bolt
4
Base
5
Drum
Assembly Instructions
Insert handle and secure it with a lock nut.
Before Each Use
⚠
WARNING
CHECK BEFORE USE
Check the safety devices and the safe condition of the product.
Check for visible defects.
Check that all parts of the product are firmly attached.
Check that the safety devices are in working order.
