Page 12 of 17
Check that bike(s) are properly secured before beginning transport.
Before each use, inspect bike rack for signs of wear, corrosion, and fatigue. Replace broken or
worn parts before continuing use.
Operating Instructions
⚠
WARNING
Do not exceed the rated load capacity of 200 lb.
Never allow loads or items on the bike carrier to block or impede exhaust from vehicle. This can
cause a fire or damage to personal property or vehicle.
Follow all federal DOT and any applicable state laws and regulations for installation and use.
1. Lift the bike carrier and insert the receiver mounting bar into the hitch receiver on the vehicle.
2. Line up the horizontal hole in the receiver mounting bar with the hole in your hitch. When the
holes line up, place your hitch pin (or locking mechanism) through the holes to secure the bike
carrier.
After Each Use
Keep all parts dry, clean, and free from oil and grease.
Only use soap and a damp cloth for cleaning.
