Page 7 of 12
Assembly Instructions
⚠
WARNING
The monitor contains high voltage. It should only be opened by a qualified technician.
1. Connect the monitor wires:
a. Connect the wire with the yellow connector to the 20m 4P cable, which will connect to the camera.
If you use 2 cameras, the white wire connector will be used to connect the cable to the second
camera.
b. Connect the black wire for grounding.
c. Connect the red wire to the car key power.
d. Connect the green wire to the reversing light power positive, DC12V-24V.
2. Connect the wires for the backup camera:
Connect the wire for the backup camera with the other end of the 20m 4P cable.
