Ultra-tow 54604, Owner'S Manual, Page: 6 / 14

Page 6 of 14

Maintain an adequate vertical down (tongue) load to maintain control of the trailer (generally 10%)
without exceeding the specified rated capacities.

Other steps and inspections are also required Consult OSHA, D.O.T. regulations, and the
American Trucking Association for complete coupling and uncoupling procedures.

Check that the ball’s load rating is the same as or greater than the coupler’s load rating.

ALWAYS use safety chains.

DO NOT use the top holes for mounting.
Towing
⚠
WARNING
For use with trailers and equipment designed for on-road towing within the stated capacities.
Installation Instruction
⚠
WARNING

Use a secure mounting structure of sufficient strength to support the rated capacity of the coupler
in accordance with SAE J684.

Bolt the coupler to the front of the trailer tongue, bolting through the coupler’s side holes. Use ½”
diameter grade fasteners (8), properly tightened (not included).

Additional bolts may be used in the top holes for extra strength, if desired.

The recommended minimum torque is 80 ft-lbs. (per SAE J429).
Before Each Use
⚠
WARNING

Inspect for proper operation.

Inspect, in particular, the coupling area. Replace when the wear exceeds 1/8
"
(.125
"
) from the
original surface profile.

Inspect for worn, damaged, and missing parts. Replace as required.
Operating Instructions
⚠
WARNING