Page
6
of
11
Operating Instructions
⚠
WARNING
All welding must be performed by an AWS certified welder. It is the user's responsibility to be sure the
structure that the mounting channel is welded to is capable of 5,000 lbs. vertical load and 25,000 lbs.
gross trailer weight.
Ring Hitch Mounted in Channel
5. T
o lock insert safety pin
Place the jack at the desired location. Weld 1” in two locations on both sides of the jack using a 3/16”
fillet weld.
Maintenance
For proper performance, the following should be performed every 10,000 miles or 6 months,
whichever comes first.
Maintain the product by adopting a program of conscientious repair and maintenance in accordance
with the following recommended procedures. It is recommended that the general condition of any tool
be examined before it is used. Keep your tool in good repair. Keep all cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control. Keep handles dry, clean, and free from oil and grease. The following chart is based on a
normal operation schedule.
