CAR FINDER MODE
SILENT LOCK / SILENT UNLOCK
1 Press and HOLD the Lock button for three seconds.
2
3 The park lights will begin to flash and the horn will begin to honk.
4 To turn off panic, press Lock or Unlock buttons on remote.
5 If no button is pressed, Panic Alarm will sound up to 1 minute then turn off.
The doors will lock and the Starter Disable will activate. (optional)
Panic Mode
is a personal protection feature that allows you to activate your alarm
from the remote transmitter. This feature can be used to draw attention to your
vehicle if you feel threatened.
- PRESS & HOLD button number 4 on the remote transmitter for 3 - 4 seconds.
- The park lights will flash and the horn will honk 5 times.
This feature helps in locating your vehicle in a busy parking lot. It allows you hear
and see your vehicle from a distance.
1 Press then release the Lock & Unlock buttons together.
2 If the system is UNLOCKED, it will LOCK with no horn chirps and 1 light flash.
3 If the system is LOCKED, it will Unlock with no horn chirps and 2 light flash
.
PRESS & HOLD for 3 sec
PRESS TOGETHER
ACTIVATE PANIC MODE
PRESS HOLD
+
SYSTEM PROGRAMMING -
Menu 1
PAGE 6
KE-6
OWNER'S MANUAL
TRANSMITTER FUNCTIONS
AUX OUTPUT
The Aux output can be programmed for a variety of custom applications. It is
activated by button 3. Please check with your installation center on use and
activation for this option.
IGNITION AUTO LOCKS
This optional feature can be programmed to automatically lock the doors when the
ignition key is turned to the on position then automatically unlock the doors when
the ignition key is turned to the off position.
DOME LIGHT SUPERVISION
This feature is designed to turn on the interior or exterior lights of your vehicle
when the Disarm/Unlock button is pressed. The light circuit will stay active for up to
30 seconds or until the ignition key is turned to the on position.
SYSTEM PROGRAMMING -
Menu 1
PAGE 7
KE-6
OWNER'S MANUAL
OTHER FUNCTIONS
VALET MODE / EMERGENCY OVERRIDE
This feature will disable or re-enable the system without the use of the remote
transmitter. When the system override had been activated the door locks and
trunk features will still be operational however the horn and starter disable will not
activate.
The LED status light will come on "STEADY" to confirm Valet Mode is
ACTIVE. The LED status light will be "OFF" to confirm Valet Mode is NOT
ACTIVE and system is in normal operation mode.
Horn will chip 5 times to confirm Valet Mode / Emergency
Override has been activate or 2 times for deactivated.
Press and hold the valet switch for 8
to 15 seconds (Time depends on
"Valet Settings" Program Option)
Turn the Ignition Key ON
(Leaving the key ON)
2 CHIRPS = OFF
5 CHIRPS = ON
