KE-5
Installation Manual
Plug the Connectors into the Module
. Press the transmitter buttons to check for
proper operation. Once it is determined that everything is working correctly the module
can be mounted.
***Before plugging the module in make sure that Ignition Key is in the OFF position***
STEP 1 - The following wires MUST be connected for proper operation.
STEP 2 - CONNECT AND MOUNT THE MODULE
Red
12vt Power
(+) 15amp Input
Constant 12vt power sourse.
Yellow
Ignition
(+) 12volt Input
Main ignition wire.
White
Park Lights
(+) 15amp Output Connect to positive park lights
Black
Ground
(-) Input
Connect to chassis ground.
Green
Lock Output
(-)500ma Output
Connect to door
lock
relay.
Blue
Unlock Output (-)500ma Output
Connect to door
unlock
relay.
Orange
St.Disable
(-)500ma Output Connect to Starter Disable relay.
Brown
Horn Output (-)500ma Output Connect to horn relay.
Grey
Trunk Output (-)500ma Output Connect to Trunk Release relay.
Pink
2nd Unlock (-)500ma Output Connect when installing Driver's Door Priority.
Optional Connections
Mount the module
by selecting a location under the dash that is secure.
Be certain that the module does not obstruct any serviceable areas. The
module must be free from moving parts such as brake, clutch and gas
pedals and the linkages that are attached to them.
Lock
Trunk
Unlock
Basic remote operations
See Owners Manual for more transmitter
operations
