PAGE 9
OWNER’S GUIDE
Remote Transmitter Learn
STEP 1
- Within 3 seconds turn the ignition key to the “
ON
”
position
three
times leaving “
ON
” the third time.
NOTE:
STEP 3
-
While HOLDING the Program Button
, press and release
the button on each of the remote transmitters to
be programmed.
If the parking lights do not turn “ON”, release the Program Button and
turn the ignition to the “OFF” position, wait 5sec and repeat steps 1 & 2.
STEP 2
-
Press and HOLD the Program Button.
The park lights will
turn “
ON
” and the horn (optional) will honk once.
Continue HOLDING the Program Button
,
the park lights will turn “
OFF
” and the horn
will honk five times quickly.
IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
Battery Replacement
The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with two quality 3V lithium batteries.
