Installation Guide
PROGRAMMING
8
PROGRAM MODE - USER SETTINGS
Enter User Program Mode - See Page 7. for details on entering Program Mode
Setting 1- Ignition Auto Lock
Setting 2- Horn Honk Settings
Setting 3- Door Lock Options
Setting 4 -Sensor - Enable / Disable
Setting 5 - Passive / Active Arming
Setting 6 - Active / Passive Locks
1 Double Pulse Unlock
1 Flash
A single .75 second lock and double unlock pulse (0.25 pulse.& 0 .75)
2 3 Second Lock & Unlock
2 Flashes
3 second pulses for lock & unlock
*3 0.75 Second Pulses
3 Flashes
0.75 second pulses for lock and unlock
1 Passive Arming 1 Flash Auto Arms 30 seconds after last door is closed
2 Active Arming With Rearm 2 Flashes Arms if unlock is pressed and no door is opened within 30 sec.
* 3 ACTIVE ARMING 3 Flashes ALARM ARMS ONLY WITH REMOTE TRANSMITTER
1 SENSORS DISABLED 1 Flash
INTERNAL SHOCK SENSOR AND Aux. Sensor DISABLED
* 2 SENSORS ENABLED 2 Flashes INTERNAL SHOCK SENSORS AND AUX. SENSOR INPUT ENABLED
1 Active Locking 1 Flash Doors do not auto-lock with passive arming
*2 Passive Locks 2 Flashes
DOORS LOCK WHEN PASSIVE ARMING
1 Ignition Lock & Unlock Enabled
1 Light Flash
Doors Lock/Unlock when the key is turned On/Off
2 Ignition Lock Only
2 Light Flashes
Doors Lock when ignition key is turned ON only
*3 Ignition Auto Lock Disabled
3 Light Flashes
Doors do not Lock or Unlock with Ignition key
1 Lock & Unlock chirps DISABLED
1 Flash
A audible chirp for Panic Mode only
2 Lock & Unlock chirps ENABLED
2 Flashes
Audible chirp for Lock & Unlock but NO audible indication for Start
*3 ALL CHIRPS ENABLED
3 Flashes
Audible chirp indication for Lock, Unlock and Start
Press the Valet Switch 1 time to select setting 1 (This will be confirmed by 1 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
Press the Valet Switch 2 times to select setting 2 (This will be confirmed by 2 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
Press the Valet Switch 3 times to select setting 3 (This will be confirmed by 3 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
Press the Valet Switch 4 times to select setting 4 (This will be confirmed by 4 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
Press the Valet Switch 5 times to select setting 5 (This will be confirmed by 5 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
Press the Valet Switch 6 times to select setting 6 (This will be confirmed by 6 LED flashes)
Press and hold the Valet Switch until you receive the appropriate # of park light flashes and/or siren chirps.
Release the Valet Switch. Press the Valet momentarily to move to next program step or repeat to change selection.
