background image

Manual transmission remote starters must be set into Reservation Mode before
the remote starter will activate. There are two different ways to place the system
into Reservation Mode. The activation type of Reservation Mode is determined
when the system is installed. The default setting is Auto Reservation Mode.

Auto Reservation Mode

Step 1

- While the vehicle is running with the key, place the transmission into neutral

and apply the park brake.

Step 2

- Press and release the brake pedal twice. The park lights will flash twice,

the siren will chirp twice and the doors will unlock (optional).

Step 3

- Turn the ignition key off and the vehicle will continue running.

Step 4

- Exit the vehicle and close all the doors. The vehicle will then shut off *.

Manual Reservation Mode (Dealer Programmable Feature)

Step 1 -

While the vehicle is running with the key, place the transmission into neutral
and apply the park brake.

Step 2 -

Press and release the

#

button. The park lights will flash twice, the siren

will chirp twice and the doors will unlock (optional).

Step 3 -

Turn the ignition key off and the vehicle will continue running.

Step 4 -

Exit the vehicle and close all the doors.

Step 5 -

Press and hold the

button for 3 seconds, the vehicle will then shut off.

*****THE VEHICLE MAY NOW BE SAFELY REMOTE STARTED.*****

(See page 4 for Remote Starter Functions.)

If Reservation Mode is not set, the remote starter will not activate. When the
Button is pressed the park lights will flash 4 times. 4 flashes is the diagnostic
code for “Not in Reservation Mode”

Note:

Reservation Mode will reset if the doors of the vehicle are opened. To re-enter

the vehicle without canceling the Reservation Mode (forgot something..) The
vehicle must first be remote started. While the vehicle is running the door may
be opened, when done in the vehicle, close the door and hold the

button

until the remote starter shuts off.

* If the vehicle has dome light delay, the vehicle may stay running until the dome

light turns off. This is normally no longer than 30 seconds.

Page 5

REMOTE VEHICLE STARTER

OWNER ’S GUIDE

Summary of Contents for 2250 Series













Reviews: