PAGE 23
INSTALL GUIDE
Remote Transmitter Learn
STEP 1
- Within 3 seconds turn the ignition key to the “
ON
”
position three times leaving “
ON
” the third time.
NOTE:
STEP 3
- While holding the Program Button, press and release the
button on each of the remote transmitters to be programmed
NOTE:
The system will respond with one chirp when a code is learned.
If the parking lights do not turn “ON”, release the Program Button and
turn the ignition to the “OFF” position, wait 5sec and repeat steps 1 & 2.
STEP 2
-
Press and hold the Program Button.
The park
lights will turn “
ON
” and the siren will
chirp once.
Continue to hold the Program
Button
, the park lights will turn “
OFF
” and the
siren will chirp 5 times quickly.
Battery Replacement
The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with a quality 23A 12volt Alkaline battery
(1-Way remote). Replace with a quality 1.5V battery (2-Way remote).
