REMOTE VEHICLE STARTER
OWNER’S MANUAL
PAGE 15
If the remote starter does not activate when the
button is pressed the park
lights will flash a diagnostic code to indicate what shutdown input has been
triggered.
PARK LIGHTS STATUS LED DIAGNOSTIC CODE
3 Slow Flashes LED’s On Solid System Is In Service Mode
4 Slow Flashes Series of 4 Flashes Not in Reservation Mode (M units)
5 Slow Flashes Series of 5 Flashes Ignition On During Start Attempt
5 Flashes Series of 5 Flashes Hood Pin Opened
6 Flashes Series of 6 Flashes Brake Pedal Shutdown
7 Flashes Series of 7 Flashes Tach Lock-Out(see dealer)
Diagnostics
Carefully remove
the screw from the
back of the remote.
Remove the top
case, then replace
the battery.
Replace top case
and Re-install
screw.
Test remote for
proper operation.
Battery Replacement
The transmitter battery should be changed at least once every year to maintain
proper operating range. Replace with a quality 23A 12volt Alkaline battery
(OE remote). Replace with two quality 3V lithium batteries (XR remote).