background image

DRIVER'S DOOR PRIORITY UNLOCK (OPTIONAL)

Press the Keyless Button to unlock the drivers door. Press the Keyless Button again 
within 3 seconds to unlock the remaining doors*

*This is an optional feature that may not be available on all vehicles.

** Optional Feature may require additional parts and labor.

UNLOCK DOOR’S 

  

(OPTIONAL)

1.  Press then release the Keyless Button on the remote transmitter.
2.  The park lights will flash and the horn (optional) will honk two times.
3.  The doors will unlock and the dome lights will activate. (optional)
4.  The LEDs  will stop flashing.

 - The LEDs will be on solid if the system is in valet mode. 

See Valet / Service Mode in this manual for further information
** Optional Feature may require additional parts and labor.

PRESS & RELEASE

PRESS TWICE

 TRUNK RELEASE/ AUX 2 OUTPUT (OPTIONAL)

1.  Press then HOLD the Keyless Button on the remote transmitter.
2.  The park lights will flash and the horn (optional) will honk two times.
3.  The doors will unlock and then the trunk release will activate.

NOTES:

 

 - For safety, the trunk release will not active when ignition key is ON.

** Optional Feature may require additional parts and labor.

PRESS & HOLD

  

1.  Press and release the Keyless Button on the remote transmitter. 
2.  The park lights will flash and the horn (optional) will Honk one time. 
3.  The doors will lock.
4.  The LED will start flashing within five seconds.

See Valet / Service Mode in this manual for further information

** Optional Feature may require additional parts and labor.

Note-The LEDs can now be programmed not to flash when the doors are locked by 
the remote transmitter.

LOCK DOORS (OPTIONAL)

PRESS & RELEASE

HOLD TOGETHER

PAGE 6

1180 SERIES

OWNER'S  MANUAL

SYSTEM OPERATIONS

PAGE 7

1180 SERIES

OWNER'S MANUAL

SYSTEM OPERATIONS

 

 

The Aux output can be programmed for a variety of custom applications. (SEE 
DEALER FOR DETAILS)

1. To activate Aux 1 output press and hold the Keyless and Start buttons for 3 
seconds.
2. The system will unlock the doors then the AUX 1 output will activate.
3. Release the buttons for a momentary output or continue holding for up to a 5 
second output.

This feature can be used to open the trunk, open or close power windows or control 
sliding doors on minivans.

NOTE-If this feature is programmed you will not be able to set the Timer Mode.

AUX OUTPUT 1 (OPTIONAL)

+

Summary of Contents for 1180 SERIES









Reviews: